My last blog entry told you about my trials and tribulations while learning how to crochet in the round. I shared with you my swatches and what I learned from each example. I was very anxious to get started using the yarn specific for the project, Halloween Tote. The project is one from Leisure Arts' item #75526 - Light-Reflecting Fashions.
All the projects in this leaflet use Red Heart® Reflective® yarn. October 31st is fast approaching so let me make one more review of my project instructions and off I go to get started!
Having crocheted multiple swatches earlier, familiarized me to the pattern instructions, as well as setting my expectations of working with multiple strands of yarn. Not that some unexpected twists and turns couldn't happen, but I thought I was prepared. Oops; a snag!
Both of these snagged areas looked worse than they were! I could easily tuck any loose fibers in between all four strands of yarn. I finished the bottom and was pleased that I did not have large holes in the composition of each stitch.I chose to work with the middle hook as pictured above. The size stamped on it says Size P [11.5 mm]. This is smaller than the millimeter hook range as listed in the book's project instructions (SizeP/Q [15 mm]) but I was pleased with the results and the hook was comfortable to hold.
As I approached Round 11 I took a closer look at my rounds and was pleased, except...except for the joining stitches! I couldn't understand why each stitch looked so loose on several rounds. Then I counted my most recent round and had one too many stitches! OUCH! I was very frustrated because I thought I marked the proper first single crochet stitch and managed the tension successfully while holding four strands. Quite the contrary!
I did some research about the joining of rounds and what pitfalls crocheters experience. The reply by Karen of Colour in a Simple Life to one of her reader's problems addressed this issue. Karen showed a marked photograph, as well as a written explanation, which solved my dilemma; read it here in the blog entry, Colour in the Winter Blues from 2013. Thank you, Karen!
I do not have a picture of the ugliness of the five rounds before I ripped them out. But I was relieved to know that there was a solution -- and it really worked. I'll show you several pictures of the corrected rounds with their joining stitches looking neat and blending in with the other single crochet stitches quite nicely.
I was happy to continue with my orange for the tote's body. Soon, I must change colors to black for the top section which included making handles. Another challenge since I had never done anything other than a flat pattern. It's tricky to work with dark colors because it really is challenging to see the stitches. Thank goodness I wasn't learning a new stitch on top of using a dark color for the first time!
I did have to rip out the first handle once, but after that I "saw" the stitches more clearly and could complete the handles successfully. If I was an experienced crocheter, I might have opted to make the handles thicker. I say this because if this tote bag will be used by an avid trick-or-treater who might gather multiple pounds of candy, while swinging the bag to-and-fro, I might try to add another round to the handles.
Okay - let's make this tote bag Halloween-ready...
The spider web was not difficult to do. Just count the number of stitches/spaces to determine where to stitch your web in a fairly symmetrical placement on your Halloween Tote. Ta-dah, done! I love it, and not in a braggadocios way, but in an accomplished manner. It is a very compact and sturdy tote bag.
Have fun getting revved up for October 31st by planning your decorations, costumes, and trick-or-treat travel route. Happy Halloween!