Get Free Patterns Weekly | Sign Up Now!

Tag Archives: Wood

  • Wood Decor: Plates, Birds & Paint

    Aren't we ready for spring? Let's make a new wood decor project for our homes using paint and birds as we clean out our nests from the winter blues!  Since March is National Craft Month, I am also trying something new with my wood piece: decoupage with a crackling effect!

    When I think of spring, I think of birds building their nests as one reminder that longer days and warmer sunshine are closer than we think. I put my hands on the book I was ready to use, Birds and Butterflies Decorator Collection (Leisure Arts #7066).

    Beautiful vintage prints are included in this book with nature as its subject matter (Leisure Arts #7066 - Birds and Butterflies Decorator Collection). Beautiful vintage prints are included in this book with nature as its subject matter (Leisure Arts #7066 - Birds and Butterflies Decorator Collection).

    In addition to using spring as my theme for my new project, I also wanted to incorporate the use of wood. Haven't you noticed how popular the use of wood has become again? Just search for ideas or walk through craft stores to find wood pallet projects, wood signs, wood initials, and wood tree crafts.

    I already had a 14" unfinished wooden plate that I could use, but I also wanted something a bit more non-traditional. I found the slight difference I was looking for with this natural-looking piece of wood from Amazon; it was advertised as a tree bark footed server. It was an authentic slice of tree repurposed as a kitchen item. Well, it seemed to be the perfect solution for me; I purchased it for this project!

    This cross-section is a beautiful slice of a tree found on Amazon for my project. It is described as a footed tree bark server. This cross-section is a beautiful slice of a tree found on Amazon for my project. It is described as a footed tree bark server.

    With my Birds and Butterflies leaflet in hand, I made a list of effect(s) I wanted my projects to have along with the required supplies. There's a great chart within the book that outlines what you'll need for each of the photographed projects shown in the leaflet.

    For both my wood plate and bark server, the first step was to sand each using both medium-grit and fine-grit sandpaper.

    A 14" wooden plate sanded twice and wiped clean with a dry tack cloth. A 14" wooden plate sanded twice and wiped clean with a dry tack cloth.

    For wooden surfaces, a primer was needed to be applied before anything else, followed by another round of sanding. After wiping away the dust once again, I applied a base coat.

    I masked the outer edge with plastic so that the tree bark would not get Primer on it when applied. Then, a first coat of base coat acrylic paint was applied. I masked the outer edge with plastic so when Primer was applied, it would not get on the tree bark. Then, a first coat of base coat acrylic paint was applied.

    After the turquoise paint was applied near the center of the bark server, I painted the surface with a spring green color. I didn't know if the darker turquoise area would be noticeable underneath the green, or, through how many layers the crackling effect would appear. Here's a close-up of the crackling effect.

    Green acrylic paint was applied over the dark turquoise as my base coat(s). You can see the green between the cracks. Green acrylic paint was applied over the dark turquoise as my base coat(s). You can see the green between the cracks.
    To create the cracked effect, crackle medium was applied over the base coat(s). Paint was applied over the crackle medium rendering the cracks. Finally a glazing mixture was applied over the crackle medium. To create the cracked effect, crackle medium was applied over the base coat(s). Paint was applied over the crackle medium rendering the cracks. Finally a glazing mixture was applied over the crackle medium.

    The wooden plate had its rim painted yellow with its center an antique white. Then a darker green was used in preparation for the future inset bird nest image to be decoupaged in the plate's center.

    The 14" wooden plate had the same procedures done to it as described for the server. Except, to add an additional masked look to the paint on the plate's rim, I used a dry brush to apply a very light layer of paint over the cracked paint. The 14" wooden plate had the same procedures done to it as described for the bark server with one exception.. I added an additional masked look to the paint on the plate's rim, by using a dry brush to apply a very light layer of paint over the cracked paint.

    Okay, so far so good but how to make this plate's crackling effect and use of the print images different from the bark server project? Below you'll see the completed steps that I had so far; I needed to pause with this project to consider my next step.

    One image for the wooden plate. What else can I do to give it even more dimension that just the crackling effect? One image for the wooden plate. What else can I do to give it even more dimension than just the crackling effect?

    Moving right along with the bark server, I needed to decide on the print images to use and their placement. I cut out many images from the book and started positioning them on the bark server without gluing until I decided on a final composition. I think the below placement looked like a winner!

    Deciding what print images to use on which wood pieces. I'm glad I've cut several from the leaflet; now I can reposition to my heart's content! Deciding what print images to use and their placement on the bark server. I'm glad I've cut several from the leaflet; now I can reposition to my heart's content!

    As I reread the crackling steps in the Birds and Butterflies leaflet, I noticed a sentence outlining how to create a "stained" topcoat effect. Maybe I would try that along with gluing reeds and sprigs of shrubbery around the plate's rim; that would create the effect of peering in on the nest and its inhabitants while in its natural environment!

    Maybe I'll try the "stained"topcoat effect as described in the leaflet 7066 - Birds and Butterflies Decorator Collection. Then I'll start experimenting with placing reeds and springs of shrubbery to the plate's rim for an additional dimensional effect. Maybe I'll try the "stained" topcoat effect as described in the leaflet 7066 - Birds and Butterflies Decorator Collection. Then I'll start experimenting with placing reeds and sprigs of shrubbery to the plate's rim for an additional dimensional effect.

    Here are my final two wood projects... I am pleased with the results. There are multiple steps to be coordinated with the effects and/or paint techniques you plan on trying. So be careful that you've outlined the steps you need to take and supplies you need to have on hand!

    Here's the finished wooden server that won't be used for food any longer. It is now a display piece, and I will happily display it in honor of spring! Here's the finished wooden bark server. It won't be used for food in my household; it is now a display piece! I will happily display the bark server in honor of spring!
    The final plate decorated to give the viewer the effect of peering through the reeds only to discover a warbler's nest. What a great present this would make for any bird lover! The final wooden plate decorated to give the viewer the effect of peering through the reeds only to discover a warbler's nest. What a great present this would make for any bird lover!

    There are multiple steps with each of these projects, but they are not difficult. You must make sure you follow the manufacturers' directions on each of the supplies that you purchase for the effect you desire to create on your project(s).

    Enjoy your new discoveries both in nature and in art; happy National Craft Month!

    Martha

     

1 Item(s)

Please wait...

Copyright: © 2017 Leisure Arts. All Rights Reserved.